Electrical Fuses - Mercedes-Benz GLS 2020 Operator's Manual

454 Breakdown assistance
Installing the towing eye
Press the mark on cover 1 inwards and
#
remove.
Screw in the towing eye clockwise as far as it
#
will go and tighten.
Vehicles with a trailer hitch: Vehicles with a
trailer hitch do not have a rear bracket for the
towing eye. Fasten the tow bar to the trailer
hitch.
% Make sure that cover 1 engages in the
bumper when you remove the towing eye.
* NOTE Damage to the vehicle due to
incorrect use of the towing eye
When a towing eye is used to recover a vehi‐
cle, the vehicle may be damaged in the proc‐
ess.
Only use the towing eye to tow away or
#
tow start the vehicle.
Tow starting the vehicle (emergency engine
start)
Vehicles with automatic transmission
* NOTE Damage to the automatic trans‐
mission due to tow starting
The automatic transmission may be damaged
in the process of tow starting vehicles with
automatic transmission.
Vehicles with automatic transmission
#
must not be tow started.
Vehicles with automatic transmission must
#
not be tow-started.

Electrical fuses

Notes on electrical fuses
& WARNING Risk of accident and injury
due to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher
amperage, the electric line could be overloa‐
ded.
This could result in a fire.
Always replace faulty fuses with speci‐
#
fied new fuses containing the correct
amperage.