Tips - Philips HL1659/28 User Manual

18. To remove the inserts from the insert
holder, take the insert holder in your hands
with its back pointing towards you. Push
the edges of the insert with your thumbs
to make the insert fall out of the holder
Cutting edges are sharp. Avoid touching
them
19. The adjustable slicing disc allows you to
cut ingredients to any thickness you like.
Twist the holder on the base of the disc to
get the required thickness. Be careful, as the
cutting edges of blade are very sharp
(Fig. 53)
Built in safety lock:
• The appliance is provided with safety
system. It ensures that the appliance will not
start until any accessory is properly fi xed,
i.e. the lid is placed and the arm is holding
the lid properly (Fig. 54)
• While the motor is running, if the arm
is lifted or an accessory is unlocked, the
appliance will stop working automatically


7.0 Tips

Handy tips for effective use:
• The lid of the wet and blender jar has a
cap. By opening this cap, you can check the
content to add water etc. Hence there is
no need to open the lid (Fig. 55)
• Don't remove the arm while the application
is still on, as this will result in Auto shut off.
The LED will show (Time remaining) 02:AE
(Fig. 56)
• Don't unlock the jar while the application
is still on, as this will result in Auto shut off.
The LED will show JE: 02 (Time remaining)
(Fig. 57)
• If both, arm and jar are removed during the
operation, the LED will show JE:AE (Fig. 58)
• After the arm is placed again and/or jar is
locked again, remaining time is displayed.
To restart the operation, bring back speed
selector knob to '0' position and then turn it
clockwise to the required speed position
(Fig. 59)
• In order to avoid motor burning due
to overloading, this appliance is fi tted
with power shut off mechanism. So, if it
sometimes stops due to overloading, the
red knob at the bottom will come out by
itself. This function warns you about the
overloading of your appliance. Simply switch
off the appliance in such a case. Remove
the excess load from the jar. Now wait for
2-3 minutes. Then press the red knob at
the bottom of the appliance and start the
appliance. The appliance will start working
again (Fig. 60)
• All applications carried out in the food
processing bowl, should be done at 'Speed
1' (Fig. 61)
• During the operations, if the appliance is
switched off, the remaining set time will
stay in the memory of the appliance (Not
more than 5 minutes). This ensures that the
operation is completed by the set time only
(Fig. 62)
• If there is a power failure, the appliance will
come to default setup
• In between the operation, if the set time
needs to be cancelled, bring the speed
selector switch to '0' position and then
press the mode button twice. (Pressing
mode button only once will bring the
appliance to manual mode) follow the steps
to set the new timings (Fig. 63)
