Connecting To The Nmea 0183 Data Port - Humminbird RX AIS Installation And Operation Manual

are automatically transmitted via the high speed port. This is particularly useful when using a
chartplotter having only a single NMEA 0183 port. As any other sensor (such as a gyro-compass) can
be connected to the AIS receiver via the low speed port, and the AIS receiver can be connected via the
high speed port to the chartplotter resulting in the chartplotter receiving both AIS information and
heading information simultaneously. Configure your equipment to the correct baud rate. The baud
rate is determined by the port you've chosen for connection.
Figure 9

Connecting to the NMEA 0183 data port

Red
Power in +
Black
Power in –
Light green
Not used
Orange
Not used
Brown
Transmit +
Blue
Transmit –
White
Receive +
Green
Receive –
Purple
Transmit +
Pink
Transmit –
Grey
Receive +
Yellow
Receive –
Installation
NMEA 0183
Port 1
38,400baud
(chartplotter)
NMEA 0183
Port 2
4,800baud
(other NMEA 0183 device)
Page 20