Table of Contents
Advertisement
Step 3 - Connecting the accessory cable
Figure 8
Position of the Power and Data connector
An accessory cable is supplied with the product to provide connections to power and the NMEA 0183
data ports. The cable has a pre-moulded connector at one end, which should be connected to the
connector on the unit marked 'PWR/DATA'. The other end of the cable has twelve colour coded bare
wires ready for connection. Table 1 lists the function of each colour coded wire for reference.
Wire colour
Red
Black
Light Green
Orange
Power and data
Description
Power in +
Power in -
Not used
Not used
VHF antenna
NMEA 2000
Function
Power supply connections
No connection
Installation
Page 18
Advertisement
Table of Contents
