Table of Contents
Advertisement
Installation
• The AIS receiver is fully waterproof to ingress protection rating IPx6, however it is recommended
that the AIS receiver is not subjected to extended periods of exposure to spray or submersion.
• It is recommended that the AIS receiver is installed in a 'below decks' environment.
• It is acceptable to mount the AIS receiver either vertically or horizontally.
• The product is supplied with four self tapping screws for attachment of the AIS receiver to a
suitable surface. Please refer to Figure 6 for guidance.
• The AIS receiver should be mounted in a location where the indicator is readily visible as this
provides important information on the status of the AIS receiver.
Figure 5
AIS receiver dimensions
Page 15
152 mm
175 mm
48 mm
Advertisement
Table of Contents
