Language Setup; Audio Setup; D) Video Setup - LENCO DVD-30K Instruction Manual

DEFAULT
Choose this option to resume all the setup options to default settings.
b)

LANGUAGE SETUP

Highlight the OSD LANGUAGE option, and press the Arrow buttons to choose the
OSD language you prefer. Press Enter to confirm, and it will display the OSD in that
language.
Highlight the AUDIO LANG option, and press the Arrow buttons to choose the audio
language you prefer. Press Enter to confirm. If the disc you are playing has that
language available, it will output audio in that language.
Highlight the SUBTITLE LANG option, and press the Arrow buttons to choose the
subtitle language you prefer. Press Enter to confirm. If the disc you are playing has that
language available, it will display subtitles in that language.
Highlight the MENU LANG option, and press the Arrow buttons to choose the menu
language you prefer. Press Enter to confirm. If the disc you are playing has that
language available, it will display the menu in that language.
Notes:
If your preferred language isn't available, the disc's default language will be
played.
c)

AUDIO SETUP

Highlight the AUDIO OUT option, and press the Arrow buttons to choose the audio
output mode you prefer to. Press Enter to confirm; There are 3 optional audio output
modes: SPDIF / OFF, SPDIF / RAW, and SPDIF/ PCM.
SPDIF / OFF: From the Coaxial Output jack and the Optical Output jack, no signal
is output.
SPDIF/ RAW: Choose this setting if your DVD player is connected to a power
amplifier with a coaxial cable or an optical cable; When playing a disc recorded
with Dolby Digital and MPEG audio formats, the corresponding digital signals will
be output from the Coaxial Output jack or Optical Output jack. This player's digital
output jacks are designed for a connection to a Dolby Digital or MPEG receiver or
decoder.
SPDIF / PCM: Choose this setting if your MPEG 4 DVD player is connected to a
2-channel digital stereo amplifier; When playing a disc recorded with Dolby
Digital and MPEG audio formats, audio signals will be modulated into a 2-channel
PCM signal, and it will be output from the Coaxial Output jack or Optical Output
jack.
MIC SETUP:Selecting Auto ,Mic function opens; when selecting off,Mic closes.
d) VIDEO SETUP
BRIGHTNESS
Setup Menu System
17