Table of Contents
Advertisement
Specification of the MPEG 4/MPEG 4 DVD player
The default setting is eight.
Notes:
If the password option is locked, you cannot set the ratings limit; the rating limit
doe not work when the password option unlocked.
DEFAULT
Choose this option to resume all the setup options to default settings.
b)
LANGUAGE SETUP
Highlight the OSD LANGUAGE option, and press the Arrow buttons to choose the
OSD language you prefer to. Press Enter to confirm, and it will display OSD in that
language;
Highlight the AUDIO LANG option, and press the Arrow buttons to choose the audio
language you prefer to. Press Enter to confirm. If the disc you are playing has that
language available, it will output audio in that language;
Highlight the SUBTITLE LANG option, and press the Arrow buttons to choose the
subtitle language you prefer to. Press Enter to confirm. If the disc you are playing has
that language available, it will displays subtitles in that language;
Highlight the MENU LANG option, and press the Arrow buttons to choose the menu
language you prefer to. Press Enter to confirm. If the disc you are playing has that
language available, it will displays menu in that language;
Notes:
If your preferred language isn't available, the disc's default language will be
played.
c)
AUDIO SETUP
Highlight the AUDIO OUT option, and press the Arrow buttons to choose the audio
output mode you prefer to. Press Enter to confirm; There are 3 optional audio output
modes: SPDIF / OFF, SPDIF / RAW, and SPDIF/ PCM.
SPDIF / OFF: From the Coaxial Output jack and the Optical Output jack, no signal
is output.
SPDIF/ RAW: Choose this setting if your DVD player is connected to a power
amplifier with a coaxial cable or an optical cable; When playing a disc recorded
with Dolby Digital, DTS and MPEG audio formats, the corresponding digital
signals will be output from the Coaxial Output jack or Optical Output jack. This
player's digital output jacks are designed for a connection to a Dolby Digital, DTS ,
or MPEG receiver or decoder.
SPDIF / PCM: Choose this setting if your MPEG 4 DVD player is connected to a
2-channel digital stereo amplifier; When playing a disc recorded with Dolby
Digital and MPEG audio formats, audio signals will be modulated into a 2-channel
16
Advertisement
Table of Contents
