Master Aqua Elfin -10” Owner's Manual page 31

comes with the replacement valve.
If the board is losing air and the valves are good, it probably has a
small puncture. Small punctures can be repaired easily and
permanently. Spray around the board until air bubbles become visible
and mark the position of the leak. If you do not find air bubbles, inflate
the board to maximum air pressure and try to listen to find the leak, if
you can narrow the area down, return with a spray bottle to identify
the source of the leak.
Repair Kit
Punctures less than 1/8" in size can be repaired simply without a patch.
Deflate your board, then clean and dry the area to be repaired. Apply
a small drop of glue to cover the puncture, and let it dry 12 hours.
If your board needs repair,use the patches in the repair kit and follow
these steps:
 Deflate the board completely, lay it flat and wait for it to dry.
 Cut a patch that is 2 inches larger than the tear/rip all the way
around.
 Use alcohol to clean the repair area.
 Apply three coats of adhesive to the patch and the board. Wait 5
minutes in between each coat.
 Place the patch over the tear/rip. The adhesive will react quickly, so
make sure the positioning is precise/accurate. Use the roller to
EN