List Of Required Parts - Wolf COB Series Maintenance Instructions Manual

Maintenance tools included in the COB standard
delivery
Standard delivery up to 12/2009
Setting gauge with scraper
Maintenance tool
The maintenance instructions supplied with the appliance must be observed when carrying out maintenance.
Maintenance requires the following:
Setting gauge Cleaning hook
Maintenance tool
We recommend you have
the following as part of your
service kit:
3062549_201510

3. List of required parts

Standard delivery from 01/2010
Setting gauge
Cleaning brush
Pos. Description
1 COB maintenance tools
Cleaning brush
Maintenance tool
Cleaning hook (from 01.2010)
Setting gauge (from 01.2010)
COB-15 maintenance set
2
Oil nozzle Danfoss 0,30/80°S
2 COB-20 maintenance set
Oil nozzle Danfoss 0,40/80°S LE
2 COB-29 maintenance set
Oil nozzle Danfoss 0,55/80°S LE
2 COB-40 maintenance set
Oil nozzle Danfoss 0,55/80°S LE
Oil nozzle Danfoss 0,65/80°S LE
Also included in all maintenance sets
2.1
Combustion chamber lid seal ring
Silicone grease
Oil filter replacement cartridge 40 μm Siku
Flat gasket for flame tube/flame tube adaptor
with four oval head screws M 4x10
Seal ring for flame tube/flame tube adaptor
(87 x 2.5 mm)
Flame light tube end piece
Cable grommet
3 Replacement granulate for neutralisation COB-15/20/29
3 Replacement granulate for neutralisation COB-40
4 Measuring instrument for BimSch test
5 Screwdriver
6 2x SW 16 open-ended spanners
7 Allen key 4 mm
8 Allen key 6 mm
Item Description
1 Gasket for flue DN 100
2 Ignition electrodes
3 Seal ring for oil/air connection
4 Boiler sensor
6 Ignition cable
Cleaning hook
Maintenance tool
Cleaning brush with
extension for COB-40
Part no.
Standard delivery
24 83 520
24 83 394
24 83 916
24 83 879
89 06 615
89 06 588
89 05 809
89 05 812
89 05 872
89 05 839
89 06 625
89 05 839
89 06 619
89 05 729
86 02 264
24 82 496
89 06 731
89 06 617
28 00 707
39 10 171
24 83 972
24 83 974
-
-
-
-
-
Part no.
86 12 016
24 83 647
89 05 738
27 41 058
24 83 310
5