Minolta MNCD36 User Manual page 14

4.2.5 White Balance
This setting determines the color of light present in your photos. It can make scenes seem
warmer or cooler in lighting depending on how the scene you're shooting in affects the frame.
1. In PHOTO mode, press the MENU button. Select 'White Balance' by using the UP or
DOWN buttons. Press the OK/RECORD button to enter the 'White Balance' submenu.
2. Press the UP or DOWN buttons again to navigate the submenu, and select a setting.
You can select from Auto, Daylight, Cloudy, Tungsten, and Fluorescent.
3. Press the OK/RECORD button to confirm your selected setting.
4. To exit the settings menu, press the MENU button twice and your camcorder will return
to the main status screen of the current mode.
4.2.6 ISO
This setting determines the light sensitivity in the photos being captured.
1. In PHOTO mode, press the MENU button. Select 'ISO' by using the UP or DOWN
buttons. Press the OK/RECORD button to enter the 'ISO' submenu.
2. Press the UP or DOWN buttons again to navigate the submenu, and select a setting.
You can select from Auto, 100 and 200.
3. Press the OK/RECORD button to confirm your selected setting.
4. To exit the settings menu, press the MENU button twice and your camcorder will return
to the main status screen of the current mode.
4.2.7 Date & Time Stamp
This setting allows you to imprint a date, or date & time onto your captured photos. Once a
photo is captured with either imprint, the imprint cannot be removed.
1. In PHOTO mode, press the MENU button. Select 'Date & Time Stamp' by using the UP
or DOWN buttons. Press the OK/RECORD button to enter the 'Date & Time Stamp'
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu, and select a setting.
You can select from OFF, Date and Date & Time.
3. Press the OK/RECORD button to confirm your selected setting.
4. To exit the settings menu, press the MENU button twice and your camcorder will return
to the main status screen of the current mode.