Overview Of The Sonicwall Email Security Appliance - SonicWALL Email Security 7.0 8000 Getting Started Manual

6 | Email Security Software

Overview of the SonicWALL Email Security Appliance

SonicWALL Email Security Appliance
* Alerts are explained in detail in light path diagnostic panel. To access, push the diagnostic panel
release latch to the left and pull out the panel.
SCSI Drive Allows SCSI drives in a RAID array to be hot-swapped should one
Bays drive fail.
Power LED Indicates the SonicWALL Email Security appliance is powered on.
Power Button Allows the SonicWALL Email Security appliance to power on or off.
Diagnostic Can be pulled out (push release lever to the left) for detailed expla-
Panel nation of alerts.
Alert LED Indicates an alert. See Diagnostic panel for more information.
HDD LED Indicates data transfer to and from the hard disk drive.
LAN Port Allows the SonicWALL Email Security appliance to connect to your
local area network or management station.
Serial Port Allows direct connection to the appliance via terminal services to
use the CLI.
Power Supplies Two power supplies allow the SonicWALL Email Security appliance
to utilize redundant AC power using the supplied power cables.
SCSI Drive 1
SCSI Drive 2
LAN Port
Alert:
Do not plug devices into any ports (other than those indicated) unless
explicitly instructed to do so by a SonicWALL technical support
representative. Doing so may void your warranty.
Power LED
Power Button
Serial Port
Power Supply 1
Diagnostic Panel Release
Alert LED*
HDD LED
Power Supply 2