Grinder Maintenance - Gaggia 10001800 Operating And Maintenance Manual

10
Apply the grease evenly.

GRINDER MAINTENANCE

After approximately 2000 grinding cycles, the grinder needs a slight adjustment to ensure it is running in
peak condition.
WARNING!
This operation should be carried out carefully and by an experienced user. The screw could fall into the
grinder; if it happens remove it before restarting the machine. Protect the grinder hole with a cloth to avoid
this problem. The snap is signalled by a message on the coffee bean hopper; refer to these messages when
this adjustment is performed.
EMPTY THE COFFEE BEAN HOPPER.
1
show icon my custom
explanation coffee
Press and dispense two coffees.
4
Unscrew the screw that holds the
service door closed.
Then reposition the door and attach it with the previously removed screw.
11
Insert the washed and dried Brew
Group. DO NOT PRESS THE
"PUSH" BUTTON.
2
program-
ming
menu
When the following display appears,
press "ok" and repeat the
operations from point (1) just once.
5
Remove screws and service door.
add coffee
beans
ok
12
Insert the coffee grounds drawer.
Close the service door.
3
Repeat the cycle, turn off the
machine and unplug it.
6
Adjust until it clicks.
43