Through Selection From Saved Data - Konica Minolta CHROMA METER CS-200 Instruction Manual

continuation from a p.64, 65.
9 9

(2) Through selection from saved data

7.
Press either
[USER CAL] and then
< USER CAL DATA> screen appears.
8.
Press either
to select stored data.
Please select data which was measured using
CH00 (KONICA MINOLTA' s calibration standard.)
The data are considered to have been calculated using CH00 (KONICA
MINOLTA's calibration standard) without compensation coefficients for
user calibration, even if data measured using a calibration channel other than
CH00 are selected. Because of this, when existing data measured using
a calibration channel other than CH00 are selected for performing user
calibration, user calibration cannot be performed properly.
9.
COLOR
Press key in SHIFT mode,
and select color space.
Select same color space as calibration value
to be entered in procedures from
10.
ENTER
Press key.
Calibration entry screen appears.
15 10, 14
or key to select
ENTER
key.
or key
11 13
to
68
< >
CH SETTING
<
CH01: DEFAULT
USER CAL
CH ID NAME
CH COPY
CH RESET
BREAK:[ESC]
[ ] = [ 2° ]
<USER CAL DATA>
CH01:<DEFAULT>
Lv ------
x ------
y ------
SELECT MEH DATA
OR MEASURE.
NEXT : [ENTER]
[ ] = [ 2° ]
<USER CAL DATA>
CH01:<DEFAULT>
Lv ------
x ------
y ------
SELECT MEH DATA
OR MEASURE.
.
NEXT : [ENTER]
[ SFT] = [ 2° ]
<USER CAL DATA>
CH01:<DEFAULT>
Lv ------
x ------
y ------
SET CAL VALUE.
OK : [ENTER]
[ SFT] = [ 2° ]
12
7, 8, 11
>
< >
ANGL 1° VIEW
< >
SPD AUTO
< >
SYNC NO SYNC
< >
LENS STANDARD
cd/m 2
< >
MEM AUTO NUM
<MEMORY DATA>
M002 :
Lv 100.76
x 0.3945
y 0.3998
< >
ANGL 1° VIEW
< >
SPD AUTO
< >
SYNC NO SYNC
< >
LENS STANDARD
cd/m 2
< >
MEM AUTO NUM
<MEMORY DATA>
M002 :
Lv 100.76
x 0.3945
y 0.3998
< >
ANGL 1° VIEW
< >
SPD AUTO
< >
SYNC NO SYNC
< >
LENS STANDARD
cd/m 2
< >
MEM AUTO NUM
<MEMORY DATA>
M002 :
Lv 100.76
x 0.3945
y 0.3998