Life Cycle; Disposal Notes; Mechanical Design; Housing - Siemens LFL1.133 Manual

Life cycle

Disposal notes

Mechanical design

LFL1...

Housing

6/25
Building Technologies Division
Burner controls has a designed lifetime* of 250,000 burner startup cycles which, under
normal operating conditions in heating mode, correspond to approx. 10 years of usage
(starting from the production date given on the type field).
This lifetime is based on the endurance tests in the standard EN 298.
A summary of the conditions has been published by the European Control
Manufacturers Association (Afecor) (www.afecor.org).
The designed lifetime is based on use of the burner controls according to the
manufacturer's Data Sheet. After reaching the designed lifetime in terms of the number
of burner startup cycles, or the respective time of usage, the burner control is to be
replaced by authorized personnel.
* The designed lifetime is not the warranty time specified in the Terms of Delivery
The unit contains electrical and electronic components and must not be disposed of
together with domestic waste.
Local and currently valid legislation must be observed.
Plug-in design
-
Exchangeable unit fuse (including spare fuse)
-
Made of impact-proof and heat-resistant black plastic
-
Lockout reset button with viewing window showing
-
– the fault signal lamp
– the lockout indicator
- coupled to the program spindle
- visible in the transparent lockout reset button
-uses easy-to-remember symbols to indicate the type of fault and the time it
occurred
CC1N7451en
20.11.2017