Adjusting The Amount Of Frothed Milk; Stand-By - Philips HD8838/04 Operating Instructions Manual

Adjusting the amount of
frothed milk
The machine allows you to adjust the
amount of dispensed milk according to
your taste and/or the size of your cups.
Whenever you wish, it is possible to brew
a programmed amount of frothed milk in
your favourite cup. This amount may be
reprogrammed to your taste.
After fi lling the milk container, place it in
the machine. Insert the container pin in
its seat.
Make sure the container is inserted up to
its limit.
Place the cup you use every day to enjoy
your hot milk.
Press the " " button until the following
page is displayed.
Green
Press and hold the "
When the icon on the side appears, re-
lease the "
warming up for the preparation of milk.
Orange
Once the machine is warmed up, the
brewing of hot milk starts.
Green
" button.
" button. The machine is
The " " icon will appear on the display.
From now on, press the "
each time the desired amount of milk is
Green
reached in the cup.
At this point, the "
grammed; each time it is pressed and
released, the machine will brew the same
amount of hot milk that has just been
programmed.
Note: After programming, the
following page appears. See
the "Cleaning of the Milk Brewing
System" section.
Orange

Stand-by

The machine is designed for energy sav-
ing.
The machine automatically turns off after
60 minutes of inactivity.
Note: During the turning off
phase, the machine performs
a rinse cycle, if a coff ee product has
been brewed.
Black
To turn the machine on again, simply
press the ON/OFF button (if the power
button is set to "I"). In this case the ma-
chine will go through the rinse cycle only
if the boiler is cold.
" button
" button is pro-
• 21 •