Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X10QRH+ User Manual

Super X10QRH+ Motherboard User's Manual
2-5

Motherboard Installation

All motherboards have standard mounting holes to fi t different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.

Tools Needed

•
Phillips Screwdriver
•
Pan head screws (16 pieces)
•
Standoffs (16 pieces, if needed)

Location of Mounting Holes

There are sixteen (16) mounting holes on this motherboard indicated by the arrows.
JL1
JF1
Caution: 1) To avoid damaging the motherboard and its components,
please do not use a force greater than 8 lb/inch on each mounting screw
during motherboard installation. 2) Some components are very close to the
mounting holes. Please take precautionary measures to prevent damage
to these components when installing the motherboard to the chassis.
IPMI_LAN
VGA UID
COM1
HEART BEAT LED
SP1
BMC
JBT1
PCH
JSD1 JSD2
T-SGPIO2
X10QRH+
JBAT1
Rev. 1.01
OPEN 1st
CPU1
CLOSE 1st
BAR CODE
BIOS
LICENSE
CLOSE 1st
CPU4
OPEN 1st
2-14
J12 J3
OPEN 1st
CPU2
CLOSE 1st
IPMI CODE
CLOSE 1st
CPU3
OPEN 1st