Cisco Catalyst 9300 Series Hardware Installation Manual page 56

Connecting a StackWise-320 Cable
Step 2
Remove the StackWise adapter blanks from each destination StackWise port using the Torx T15 Allen key
provided in the stacking kit (or a Torx T15 screwdriver). Store them for future use.
Step 3 Install the StackWise adapter in each destination StackWise port, and secure it in place using the supplied
Torx T15 key, or a Torx T15 screwdriver.
Figure 27: Inserting the StackWise-320 Adapter
1
Step 4 Align and insert the StackWise cable connector into the StackWise adapter in the StackWise port. Push inwards
until the spring latch locks into the slot.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
44
StackWise-320 adapter 2 StackWise port
Installing a Switch