Ricoh Br-C1 Operating Instructions Manual page 3

Connecting the Machine/ System Settings
Connecting the Machine > Connecting to the Interface > Connecting to the Gigabit
Ethernet
Error
1. Make a loop 5 cm (2 inches) (1) from the end of the Ethernet cable and attach
the included ferrite core to the loop as shown.
1
Correction
1. Make loops 5 cm (2.1 inch) (1) from the end of each Ethernet cable and attach
included ferrite cores to each loop as shown.
1
CXB005
1
3
CKD005