Advertisement
Getting Started
Using the Ring Binder
Additional information
•
Be sure not to exit from Energy Saver mode or to switch the machine on when the ring
binder door is open and the binding unit is disconnected. Doing so will affect initializa-
tion, causing the ring binder function to become unavailable (although other functions
will be unaffected).
•
If you inadvertently do this, connect the ring binder's binding unit again, close the
door, and then turn the power off and back on to restore normal operation.
Paper Settings
Registering a Custom Paper > Registering a Custom Paper
Additional information
•
When you print on 12×18 coated paper weighing 163.1 to 300.0g/m
one of the following items in [Paper Name] in the Paper Library.
•
"Coated: Glossy 163.1-220.0 12x18"
•
"Coated: Glossy 220.1-256.0 12x18"
•
"Coated: Glossy 256.1-300.0 12x18"
•
"Coated: Matted 163.1-220.0 12x18"
•
"Coated: Matted 220.1-256.0 12x18"
•
"Coated: Matted 256.1-300.0 12x18"
•
Also, when you print on custom paper with a length of 297.1 to 304.8 mm, select one
of the abovementioned items in [Paper Name], and then adjust the paper size before
printing.
•
Printing in other configurations may affect the print quality.
•
Printing on the abovementioned paper at a temperature below 15°C may affect the
print quality, so it is recommended to print at 15°C or above.
Paper Settings
Adjustment Settings for Operators > Setting Values > Machine: Image Position > 0101:
Adjust Image Position With Feed Direction
Setting Items > Paper Weight 8
Error
Correction
Not applicable to this model.
4
2
, be sure to use
Advertisement
