Voice communication samples
There are several ways to make calls to desired destination in VIP-280/VIP-320. In this
section, we'll lead you step by step to establish your first voice communication via keypad
and web browsers operations.
Peer to Peer (P2P) mode
VIP-280 / VIP-320 configurations:
STEP 1:
Please log in machine via web browser, and select Line Setting in the Line config menu,.
In this Line Setting page, please insert the telephone number assigned to this line, and
then the sample configuration screen is shown below (in this sample, we're using number
7001 for incoming calls).
STEP 2:
Select VoIP Call Out in the Call Routing menu; insert the values of the index number, Area
Code and IP Address on the VoIP call out routing table for outgoing calls. The sample
configuration screen is shown below.
7