Table of Contents
Advertisement
Replacing the oven bulb
IMPORTANT: The oven must be disconnected from
your mains supply before you attempt to either
remove or replace the oven bulb.
I
NSTALLATION
The installation must be carried out by a suitably
qualified person, in accordance with the current
v
ersion of the following.
o UK Regulations
Replacements.
o Building Reg
Environment).
o Building Sta
Department).
o IEE Wiring Regulations.
Electricity At Work Regulations.
o
Before connecting the appliance, make sure that the supply voltage
marked o
n the rating plate corresponds with your mains supply
v
oltage.
W
ARNING: THIS APPLIANCE MUST BE EARTHED.
o Remove all oven shelves and the
drip tray.
o Remove the light cover (1) by
unscrewing it anti-clockwise.
o Unscrew
clockwise and remove it from its
holder (3).
o Replace
500°C, screw type pygmy.
o Do not use any other type of bulb.
o Place the
position.
and Safety Standards or their European Norm
ulations (issued by the Department of the
ndards (issued by the Scottish Development
the
bulb
(2)
the
bulb
with
lamp cover back into
anti-
a
25W
29
Advertisement
Table of Contents
