Energy Saver Key; Shutting Down The Machine - Canon imageRUNNER ADVANCE 4251 Before Using

Energy Saver Key

If the machine is idle for a certain period of time, the machine will enter the Auto Sleep mode to minimize energy
consumption. Press (Energy Saver) to cancel the Sleep mode and resume normal machine operations.

Shutting Down the Machine

This machine performs a procedure to protect the hard disk when the machine is shut down.
This enables the machine to be shut down safely, even if there are any jobs being processed, or a MEAP application is running
while the machine is shutting down.
Turn OFF the main power.
1
IMPORTANT
• Do not turn the main power OFF while using the Fax/IP Fax/I-Fax function. Sending or receiving I-fax or
fax documents cannot be done when the main power is turned OFF.
• If the message <Backing up stored data from the Remote UI...> is displayed on the touch panel display,
do not turn the main power OFF. This may cause the machine cannot back up the stored data.
• Data stored in the machine may be damaged if the Advanced Box is accessed by another imageRUNNER
ADVANCE machine or a computer immediately before the machine shuts down.
• The machine may take some time to completely shutdown. Do not unplug the power cord until the
main power indicator of the machine is OFF.
• If the main power is turned OFF during scanning or printing, a paper jam may occur.
NOTE
If [Quick Startup Settings for Main Power] in [Preferences] (Settings/Registration) and [Energy Saver/Sleep
Alert], which appears when you press
turning OFF the main power of the machine. (Depending on the situations, the machine does not startup
quickly and the tone does not sound.)
32
1 1
3 3
2 2
( )
on the control panel, are both set to 'On' , the tone sounds when
1. Open the main power switch cover.
2. Press the main power switch to the
" " side.
3. Close the main power switch cover.