IBM Power System 9040-MR9 Manual page 59
System
Hide thumbs
Also See for Power System 9040-MR9:
- Manual (72 pages) ,
- User manual (106 pages) ,
- Manual (42 pages)
Table of Contents
Advertisement
Figure 46. Replacing the power midplane
b) Using a 4mm Hex driver, tighten the four captive thumbscrews (B) on the power midplane
bulkhead. Refer to the previous image.
c) Using a 4mm Hex driver, tighten the four captive screws (C) so that the power midplane bulkhead
is securely attached to the system chassis. Refer to the following image.
System backplane for the 9040-MR9 45
Advertisement
Table of Contents
