Twisted Pair Cable Advantages; Transmission Distance; Features - Extron electronics DTP T DWP 4K D Series User Manual

Hdmi and displayport twisted pair extender transmitters
Hide thumbs Also See for DTP T DWP 4K D Series:
Table of Contents

Advertisement

DTP T DWP 4K D systems consist of a transmitter (Tx) and a receiver (Rx). The transmitters
and corresponding compatible receivers are sold separately. Each purchased transmitter is
shipped with a single external desktop 12 VDC power supply that accepts 100 to 240 VAC,
50-60 Hz input. A single power supply connected to either the transmitter or a compatible
receiver can power both units through the twisted pair cable that links the units.

Twisted Pair Cable Advantages

Twisted pair cable is much smaller, lighter, more flexible, and less expensive than coaxial,
HDMI, or DisplayPort cable. These transmitter and receiver twisted pair (TP) products make
cable runs simpler and less cumbersome. Termination of the cable with RJ-45 connectors
is simple, quick, and economical (see
Communication
NOTE: Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or STP201

Transmission Distance

The maximum transmission distance is determined by the resolution of the signal and the
twisted pair cable, graphics card, and display used in the system.

Features

Transmits HDMI and DisplayPort signals over one STP cable — Twisted pair cables
provide an economical, easily installed cable solution.
Supports DDC and HDCP transmission — The transmitters fully support long distance
transmission of the DDC and HDCP signals.
Supports computer and video resolutions up to 4K, including 1080p/60 Deep Color
Control communications pass-through — Bidirectional RS-232 or IR control signals
can be transmitted alongside the HDMI signal, so that the remote display can be controlled
without the need for additional cabling.
Analog stereo audio embedding — Analog stereo audio signals can be selectively
embedded onto the digital video output signal and transported over DTP. The DisplayPort
and HDMI inputs can be set to pass the embedded digital audio, embed the analog audio,
or to automatically embed the analog audio when no digital audio is detected.
External 100 VAC to 240 VAC, 50-60 Hz, international power supply — Included with
transmitters.
Remote powering of the transmitter or receiver — For simplified installation, the
transmitter can be remotely powered by a DTP-enabled product over the twisted pair
connection.
on page 8 for more information).
cable to link the transmitter and receiver. The DTP T DWP 4K 232 D and 332 D do
not work properly with these cables.
DTP T DWP 4K 232 D transmitters can transmit 720p, 1080i or 1080p HDTV video
signals up to 230 feet (70 meters) over STP cable.
DTP T DWP 4K 332 D transmitters can transmit 720p, 1080i or 1080p HDTV video
signals up to 330 feet (100 meters) over STP cable.
Twisted Pair Recommendations for DTP
Extron DTP T DWP 4K D Series • Introduction
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtp t dwp 4k 332 dDtp t dwp 4k 232 d

Table of Contents