Table of Contents
Advertisement
Installation
Getting Started
Connecting the AC Power Cord
This is a Safety Class 1 Product provided with a protective earth ground incorporated into the
power cord. The AC power cord is the device that disconnects the mains circuits from the mains
supply. In addition, an external circuit breaker, readily identifiable and easily reached by the
operator, should be available for use as the disconnecting device. Use the following steps to
connect the AC power cord:
Personal injury may occur if there is any interruption of the protective
WARNING
conductor inside or outside of the product. Intentional interruption is
prohibited.
Damage to the product may result without adequate earth grounding. Always use
CAUTION
the supplied three-prong AC power cord.
1. Ensure that the power cord is not damaged.
2. Install the product so that one of the following items is readily identifiable and easily
reached by the operator: AC power cord, alternative switch, or circuit breaker.
3. Insert the mains plug into a socket outlet provided with a protective earth grounding.
AC Power Cord Localization
The AC power cord included with the module is appropriate for the final shipping destination.
You can, however, order additional AC power cords for use in different areas: see
Parts" on page
112.
Proper Usage and Cleaning
The N5102A module cover protects against physical contact with internal assemblies that
contain hazardous voltages, but does not protect against the entrance of water. To avoid damage
and personal injury, ensure that liquid substances are positioned away from your N5102A
module.
Personal injury may result if the N5102A module is not used as specified.
WARNING
Unspecified use impairs the protection provided by the equipment. The
N5102A module must be used with all means for protection intact.
6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
"Replaceable
Chapter 1
Advertisement
Table of Contents
