Settings And Procedure Before Operation - Mitsubishi Electric MELSEC Q Series User Manual

4.2

Settings and Procedure Before Operation

This section shows the procedure before operating the QD73A1.
Mounting the module
Mount the QD73A1 on a specified slot.
Wiring
Wire external devices to the QD73A1.
Page 64, Section 4.6
Switch setting
Configure settings using GX Works2.
Page 100, Section 6.2
Execute zero/gain adjustment?
Zero/gain adjustment
Adjust a gain using a switch on the front part of the
QD73A1, or I/O signals and the buffer memory.
Page 59, Section 4.5
Connection check
Check the connection using GX Works2.
Page 236, Section 13.1
Operation check of the drive unit
Check the operation of the drive unit with forward/
reverse JOG operations in the factory default status.
Page 135, Section 7.3.5
Configure the initial setting
using GX Works2?
Initial setting
Configure the initial setting using GX Works2.
Page 108, Section 6.3
Configure the auto refresh setting?
Auto refresh setting
Configure the auto refresh setting using GX Works2.
Page 110, Section 6.5
Programming and debugging
Create and check a sequence program.
Page 111, CHAPTER 7
Operation
Start
NO
YES
NO
YES
NO
YES
CHAPTER 4 SETTINGS AND PROCEDURE BEFORE OPERATION
Initial setting
Create a sequence program in which initial settings
are configured.
Page 117, Section 7.3.1
4
55