Positioning Data Setting - Mitsubishi Electric MELSEC Q Series User Manual

6.4

Positioning Data Setting

Set positioning data.
Setting positioning data on the screen omits the positioning data setting in a sequence program.
(1) Setting method
Open the "Positioning_Axis_#1_Data" window.
1.
Start "Positioning_Axis_#1_Data" in the project window.
Project window
2.
Double-click "Positioning pattern", and set a positioning pattern.
3.
Double -click items other than "Positioning pattern", and input setting values.
For details on setting values, refer to the following.
Positioning pattern
Positioning address P1
Positioning speed V1
Positioning address P2
Positioning speed V2
[Intelligent Function Module]
Setting item
CHAPTER 6 VARIOUS SETTINGS
Module name [Positioning_Axis_#1_Data]
Default value
Page 82, Section 5.4 (1)
Page 83, Section 5.4 (2)
None (empty) Page 84, Section 5.4 (3)
Page 84, Section 5.4 (4)
Page 84, Section 5.4 (5)
6
Reference
109