Chapter 9
Replacement Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Press the locking button on the back side of the door (behind the opened latch handle) so that the
b.
latch handle flattens to the front side of the door (see
Figure 9-34
1
If you opened the right side of the door (as
shown in this figure), press the locking button
on the right side.
Hold the opened side of the door with one hand and use your other hand to open the latch handle on
c.
the hinged side of the door (see Callout 1 in
OL-23069-06
Replacing the Front Door and Air Intake Assemblies on the Cisco Nexus 7018 Chassis
Flattening the Latch Handle to the Door
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Figure
9-34).
2
If you opened the left side of the door, press
the locking button on the left side.
Figure
9-35) until the handle clicks.
9-63