PEUGEOT 108 Handbook page 164

7-inch touch screen tablet
Installing the update
The download of the update must be
carried out with the engine running,
the vehicle stationary, and the parking
brake applied.
Insert a USB device in the USB port.
Press "Configuration".
Press "General".
Press "Software update".
Press "Update".
A page is displayed with the old and the new
version of the software for your reference.
Press "Update software".
Do not remove the USB device or turn off
the system until the update is complete. If
the update is interrupted, start the system
update over again.
Once the update is done, the system restarts
automatically.
16
Customising the homepage
image
It is advisable to restrict file names to
32 characters, without using special characters
(e.g. : " ?; ù) so as to avoid any reading or
display problems.
Use a USB device, not a mass storage
device (telephone or media player).
To protect the system, do not use a USB
hub.
To update the system, you must have a USB
device meeting the conditions below:
- The USB device must be empty.
- Use only USB devices in the FAT32 (File
Allocation Table) format.
- Do not lock the USB device and check that
it can save files.
On the USB device create a folder named
"Startupimage" (with the upper-case letter
"S").
Copy the photo(s) into the "Startupimage"
folder.
Insert a USB device in the USB port.
Press "Configuration".
Press "General".
Check that the "Animation" option is activated.
Press "Customise startup image".
A page is displayed with a menu in which
thumbnails will be added.
Press "Transfer", then accept overwriting the
current images because the system does not
allow adding to old images.
Do not remove the USB device nor turn off
the system until the copying is complete. If
the copying is interrupted, start over.
The image is not displayed in full screen
mode.
The system returns to the presentation menu
page with the thumbnails added.
Choose an image and press "OK".
To take this into account, turn the system off
and back on.