Advertisement
Battery Removal
THIS NORELCO RAZOR CONTAINS A
NICKEL-CADMIUM RECHARGEABLE
BATTERY WHICH MUST BE DISPOSED
OF PROPERLY.
◗
Battery should only be removed when razor is
to be discarded.
◗
Remove razor from charging base and unplug
charging base from outlet before dismantling.
◗
All servicing should be performed by an
Authorized Norelco Service Location.
How To Remove Rechargeable Battery
1
Remove razor from charging base and unplug
base from outlet before dismantling. Let the
razor motor run until the battery is completely
empty/depleted.
2
Using a narrow flat-blade screwdriver, pry the
front panel off the Razor and discard (fig. 5).
Remove the button and the surrounding soft-
touch material.
3
Lift the electronic part and the battery out of
razor and then separate the battery from the
razor (fig. 6).
4
Remove battery. Do not attempt to replace
battery. Insulate battery ends by covering with
tape and/or place battery in small plastic bag.
5
Discard your razor. Do not attempt to place
the razor in the charging base and recharge the
razor after the battery has been removed.
6
Contact your local town or city officials for
battery disposal information or call:
1-800-8-BATTERY for battery drop-off locations.
Advertisement
