Advertisement
◗
Body of Razor and Shaving Head, including
Shaving Foil, may also be rinsed under running
water to remove hairs.
◗
Do not use or clean razor with water hotter
than shower temperature to avoid scalding.
Be sure all parts are dry before reassembling.
3
◗
Do not use cloth or towel to dry Shaving Foil or
cutter block; allow to air dry.
Replace shaving unit by gently pressing back
4
into position on Razor. Hold shaving unit by
the fixed trimmers located on either side of
the foil.
NOTE: Use cold or lukewarm water. Never use
cleaners such as alcohol, nail polish remover,
corrosive detergents or scouring pads.
◗
For best shaving performance, it is suggested to
lightly oil Shaving Head twice a year by spreading
a drop of mineral oil over the foil and trimmers.
If this does not improve the performance of your
razor, it may be time to replace the foil.
◗
Never immerse charging base in water or other
liquid.You may clean by wiping with a damp
cloth.
◗
This razor has no other user-serviceable parts.
Any other service should be performed by an
Authorized Norelco Service Location.
Advertisement
