Advertisement
Cleaning
◗
Regular cleaning guarantees better shaving
results.
◗
It is recommended that you replace your shaving
foil once a year.
◗
Always switch Razor off and remove charging
base plug from outlet before cleaning.
◗
Never remove or replace Shaving Head while
motor is on.
◗
Do not apply pressure or touch Shaving Head
with hard objects as this may dent or damage
foil or trimmers. If damage occurs, replace foil.
Check foil regularly.
B
Never use a razor with a damaged or broken foil.
B
AFTER EACH USE
◗
After each use, Razor should be quickly cleaned
by rinsing under running water or dipping and
shaking gently in water (fig. 4). DO NOT keep
Razor submerged in water for a long period of
time.
ONCE A MONTH - CLEANING
SHAVING HEAD
Remove the shaving unit (foil and cutter) by
1
grasping the two fixed trimmers on either
side of the foil and gently pulling the shaving
unit from the plastic housing. Once the
shaving unit is removed, hold the shaving
unit only by the trimmers.The Shaving Foil is
very delicate and should not be handled. If
foil becomes worn or damaged, replace it.
Do not apply pressure to shaving foil.
Hairs can be removed from shaving unit and
2
housing by rinsing clean, using a soft brush
or by lightly blowing out hairs. Be sure you
also brush hairs away from under the
trimmers.
NOTE: Avoid using brush on Shaving Foil, as
this may cause damage.
Advertisement
