Table of Contents
Advertisement
Figure 2:
(1) Link LED. (2) Connection Status LED.
LED Indicator
Off
Link LED is green
Link LED is orange
Connection Status LED is blinking green
Hard Drive RAID Status Indicators
Each hard drive has its own set of LED indicators to show its activity and status.
Figure 3:
(1) Status LED. (2) Activity LED.
The Activity LED flashes green when the hard drives are working. The following table describes what the
Status LEDs indicate:
LED Indicator
Green
Off
Two short green flashes every second
Flashes green, orange then off
Four short orange flashes per second
Flashes green slowly
Hard Drive RAID Status Indicators
Description
The recorder is not connected to a network.
The recorder is connected to a network at the maximum port
speed (1 Gbps or 10 Gbps).
The recorder is connected to a network at less than the
maximum port speed.
The recorder is working with other parts of the Avigilon Control
Center software.
Description
The hard drive is online.
The hard drive is disconnected from the recorder.
The system is identifying a new hard drive, or preparing a hard
drive for removal.
The hard drive is predicted to fail.
The hard drive has failed.
The hard drive is rebuilding.
8
Advertisement
Table of Contents
