Installing Nec Esmpro Agent - NEC Express5800 Series Installation Manual

Chapter 1 Installing Operating System

2.2.8 Installing NEC ESMPRO Agent

Follow the steps below to install NEC ESMPRO Agent.
1. Login the system with root user.
2. Insert the ft Server Control Software Install CD into optical disk drive of the server, and mount it by
running the following command.
# mount -r -t iso9660 /dev/scd0 /media
3. Move to the directory where NEC ESMPRO Agent is stored, and execute install script.
# cd /media/esmpro_sa/
# rpm -ivh Esmpro-*
4. Remove the ft Server Control Software Install CD from optical disk drive of the server.
# cd / ; eject /media
If eject command fails to eject CD, unmount it, and remove the ft Server Control Software Install CD from
optical disk drive manually.
5. Restart the system.
# reboot
46
In this section, description is based on the assumption that the mount source of optical disk
Tips
drive is "/dev/scd0", and destination is "/media". If the mount destination differs, substitute it
for the actual destination appropriately. If the optical disk drive is automatically mounted,
you need not mount it.
Express5800/R320c-E4, R320c-M4 Installation Guide (Linux)
2. Setting up Red Hat Enterprise Linux 6 Server