EdgeStar BIDW1802SS Owner's Manual page 21

4. Remove all debris from the filters by rinsing them under warm, running water. You may loosen
trapped particles with a soft bristled brush.
5. Once clean, reassemble the filters and place the entire filter assembly back into its
compartment. Then, rotate the course filter clockwise until it locks into place and the arrows on
the main filter and the course filter line up.
Note:
 If the filter assembly is not secured properly back into place the performance of the
dishwasher will decrease
 Never run the dishwasher without the filter system in place.
 Clean the entire filter system at least once a week when in use.
17