Philips HQ6871/01 User Manual page 3

Batteries running low
When the batteries are running low, the lower
pilot light turns red.When you have switched off
the shaver, the red light will blink for 4 seconds.
Charging
Recharge and keep the appliance at a
temperature between 5cC and 35cC.
The powerplug is suitable for mains voltages
ranging from 110 to 240V.
You can also shave without charging by
connecting the shaver to the mains.
To extend the lifetime of the batteries, remove
the powerplug from the wall socket and pull the
appliance plug out of the shaver when the
batteries have been fully charged.
C
1 Insert the appliance plug into the shaver as
far as the line on the plug.
2 Put the powerplug in the wall socket.
Do not recharge the shaver in a closed pouch.
3 When charging for the first time or after a
long period of disuse: leave the shaver to
charge continuously for 4 hours.
Charging normally takes approx. 1 hour.
4 Remove the powerplug from the socket
and pull the appliance plug out of the
shaver when the batteries have been fully
charged.
ENGLISH
5