CITROEN Berlingo Electric Handbook page 20

States of the control unit
On in the corresponding
indicator lamp colour.
POWER FAULT
POWER FAULT
Flashing in the corresponding
indicator lamp colour.
CHARGING
Normal operation
Once the charging cable is connected to a power point, all of the lamps come
on for about half a second.
Once the initialisation process is complete:
● while the charging cable is not connected to the vehicle's socket,
● while the charging cable is connected to the vehicle's socket, but charging
is not taking place.
While the traction battery is on charge.
When the charge has fi nished.
CHARGING
Operating faults and solutions
When current leakage is detected or the charging cable has a fault.
- Stop the charging procedure immediately and contact a franchised dealer
or a qualifi ed workshop.
When the charging cable has a fault.
- Stop the charging procedure immediately and contact a franchised dealer
or a qualifi ed workshop.
If the lamp on the control unit does not come on when connecting the
charging cable to a power point, check the circuit breaker for the power point:
● if the circuit breaker has opened, your installation may not be compatible
with use of the charging cable:
- contact a qualifi ed electrician to check and repair your electrical installation.
● if the circuit breaker has not opened:
- do not use the charging cable and contact a franchised dealer or a
qualifi ed workshop.
Off.