Control Unit - CITROEN Berlingo Electric Handbook

Control unit

It has four indicator lamps:
- STOP : on red.
It indicates that charging has
been interrupted by pressing
the Manual Stop button. This
action is recommended before
disconnecting the charging cable
from the domestic power point
during a charging operation.
- POWER : on green.
It indicates that the power supply
is established. If it does not come
on check that all connections are
correct. if the problem persists,
contact a franchised dealer or a
qualifi ed workshop.
- CHARGING : on green.
It indicates that charging is in
progress. If it does not come on
check that all connections are
correct. if the problem persists,
contact a franchised dealer or a
qualifi ed workshop.
- FAULT : on red.
It indicates the presence of a fault.
Check that the connections are
corrects. If this lamp does not go
off, contact a franchised dealer or a
qualifi ed workshop.
This type of control unit is equipped
with a power supply recognition system
(depending on the country). It detects
the current rating of your domestic
power supply and is able to support
and choose the most suitable rating for
a secure recharge:
- 14 A (FAST): if your electrical
installation supports it.
- 8 A (NORMAL): for a standard
electrical installation.
Use the cord supplied to hook the
control unit, so that it does not
weigh down on the power point
(risk of damage to the charging cable
or power point).
Do not touch the metal end of
the normal charging socket, nor
of the charging cable. Risk of
electrocution and/or malfunctions.
Never connect or disconnect the
the cable or charging plug with
wet hands (risk of electrocution).
The charge may be interrupted
at any time by withdrawing the
charging plug.
If exceptionally you have
to interrupt the charge by
disconnecting the charging cable
from the power point, it is essential to
fi rst press the Manual Stop button on
the controller.