Installing Your Video Recorder; Preparation For Use - Philips VR750/58 User Manual

3. Installing your video recorder

Preparation for use

This chapter shows you how to prepare the video
recorder for use. The video recorder automatically
seeks out and stores all available TV channels.
'Aim' correctly
In the following sections, you require the remote
control for the first time. When using, always
aim the front of the remote control at the video
recorder and not at the TV.
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
1.
1.
Select the desired language for the on-screen
menu by pressing
2.
2.
Press .
MENU
3.
3.
Confirm with
P +
The automatic TV channel search starts.
PLEASE WAIT
START
The video recorder does not find any TV
channels during the search
• Select channel 1 on the TV. Can you see the
saved TV channel on the TV?
If not, check the cable connection of the aerial
(aerial socket), video recorder, TV.
• The video recorder searches the entire fre-
quency range in order to find and save the
largest possible number of TV channels. It is
possible that the TV channels in your country
are broadcast in a higher frequency range. As
soon as this range is reached during the
search, the video recorder will find the TV
channels.
or
PLAY B-K STOP
C-L
.
FINISH
4.
4.
The clock setting display appears on the TV
screen.
END=EXIT
5.
5.
Set time with the number buttons
6.
6. Set 'DAY', 'MONTH', and 'YEAR' with the
number buttons
7.
7.
When all information is correct, save by
pressing
The preparation for use is now complete.
.
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
7
TIME 00:00
DATE --/--/--
SMART CLOCK [ON]
0..9 .
.
STATUS/EXIT
0..9 .
EN