Table of Contents
Advertisement
OPERATING INSTRUCTIONS
Thank you for buying a Philips video recorder.
This video recorder is one of the most sophisti-
cated and easy-to-use video recorders (VCR) on
the market. Please take the time to read this
operating manual before using your video
recorder. It contains important information and
notes regarding operation. The video recorder
should not be turned on immediately after
transportation from a cold to a hot area or vice
versa, or in conditions of extreme humidity. Wait
at least three hours after transporting the
device. The video recorder needs this time in
order to become acclimatised to its new environ-
ment (temperature, air humidity, etc.).
This video recorder is used for the recording and
playback of VHS videocassettes. Cassettes with
the VHS-C label (VHS cassettes for camcorders)
may only be used with a suitable adapter.
We hope you enjoy your new video recorder.
Important notes regarding operation
Danger: High voltage!
"
Do not remove the top cover as there is a
risk of an electric shock!
To reduce the risk of fire or electric shock,
"
do not expose this device to rain or mois-
ture.
The video recorder does not contain any com-
"
ponents that can be repaired by the customer.
Please leave all maintenance work for quali-
fied personnel.
As soon as the video recorder is connected to
"
the power supply, there are some components
that are in constant operation. To switch off the
video recorder completely you must discon-
nect it from the power supply.
!
Make sure that air can circulate freely through
the ventilation slots on the video recorder. Do
not place the device on an unsteady base.
!
Make sure that no objects or liquids enter the
video recorder. Do not place vases or the like
on the video recorder. If liquid is spilt into it,
immediately disconnect the video recorder
from the power supply and call After-sales
Service for advice.
!
Do not place any combustible objects on the
device (candles, etc.).
!
Make sure that children do not place any for-
eign objects within the openings or ventilation
slots.
PAL
These operating instructions have been
printed on non-polluting paper.
Deposit old batteries at the appropriate col-
lection points.
Please make use of the facilities available in
your country for disposing of the packaging
of the video recorder in a way that helps to
protect the environment.
This electronic device contains many mate-
rials that can be recycled. Please enquire
about the possibilities for recycling your old
device.
S
V
is a registered trademark of
HOW
IEW
Gemstar Development Corporation. The
S
V
system is manufactured under
HOW
IEW
licence from Gemstar Development
Corporation.
So that you can identify your machine for service
questions or in the event of theft, enter the serial
number here. The serial number ( PROD. NO. ) is
printed on the type plate fixed at the back of the
device. Also, we suggest that you put a mark
with your VCR MODEL NO..
MODEL NO.
VR750/58
PROD. NO.
...........................
This product complies with the requirements of
Directive 73/23/EEC +89/336/EEC +93/68 EEC.
Specifications
Voltage: 220-240V/50Hz
Power consumption : max. 25W
Power consumption (Standby): less than 3W
Rewind time: 68-78 seconds (cassette E-180)
Dimensions in cm (WxDxH): 43.5x22.6x9.2
Number of video heads : 4
Number of audio heads (Hi-Fi): 2
Recording/playback time:
3 hours (SP) (cassette E-180)
6 hours (LP) (cassette E-180)
Supplied accessories
• Operating instructions
• Remote control and 2 batteries
• Aerial cable
2
R
VR752/58
EN
Advertisement
Table of Contents
