Equalizer; Display - Electro-Voice EVOLVE Installation Manual

Portable column loudspeaker
Hide thumbs Also See for EVOLVE:
Table of Contents

Advertisement

EVOLVE Portable Column Loudspeaker
Notice!
Effect of MIC PROCESSING
The AUX-Bus signal is only affected by MUTE, so COMPRESSOR or TALK OVER have no effect
on the AUX-Bus signal.
COMPRESSOR
Engage the COMPRESSOR switch to activate the integrated compressor. The compressor
reduces the dynamic range of audio signals. Once the signal exceeds a certain threshold, the
signal gets compressed, i.e. major input level changes result in minor output level changes.
Narrowing the dynamic range often allows for easier recording or mixing the audio signal.
TALK OVER
Engage the TALK OVER switch to activate the integrated ducking facility. The ducking facility
reduces the level of the signals at the STEREO inputs whenever a signal is present at the MIC/
LINE inputs. If there is no MIC/LINE signal present the STEREO signal automatically returns to
its preset level.
MUTE
Engage the MUTE switch to mute all MIC/LINE input signals.
8.7

Equalizer

The Evolve column speaker employs an 11-band equalizer. Eleven frequency bands offering
+/-6dB gain/reduction allow the shaping of the overall sound to meet your personal
preferences to optimally match it to the acoustic conditions of different locations.
Independent graphic equalizers for MASTER A, MASTER B or AUX (each adjustable via
hardware controls or the rotary encoder) are available in the menu, please refer to section
Menu.
8.8

Display

Home screen
The home screen appears after switching the EVOLVE column speaker on. After a few seconds
the currently selected effect (number and name) is displayed. If effect parameters have been
edited, an "E" is indicated next to the preset number. Turn the FX/PARAMETER rotary control
to select another effect.
In the lower part of the display settings of the channels MASTER A, MASTER B and AUX are
indicated, please refer to following table.
Icon
/MIC
POST
M
Electro-Voice
Description
LO CUT in menu MIC PROCESSING is activated.
The master routing of channel B is set to Post.
The channel is set to Mono.
Installation manual
Mixer operation | en
31
2019-08 | 01 |

Advertisement

Table of Contents
loading

Table of Contents