Page 2
User Manual: VCC-64 SAFETY INSTRUCTIONS Please read carefully these safety instructions. •Keep this User Manual for future reference. •Unplug the equipment from the AC before cleaning. •Do not use liquid or sprayed detergent for cleaning. •Use a cloth for cleaning.
User Manual: VCC-64 Contents DESCRIPTION ........................4 FUNCTIONING ........................4 2.1.1 Rest Mode ......................4 2.1.2 Active Mode ......................5 2.1.3 Automatic Lock ..................... 6 2.2 Connection to the System .................... 6 2.2.1 Data Bus and Power Supply ................. 6 2.2.2...
Lock activated indicator • Connection of devices by bus mode FUNCTIONING The VCC-64 has a 2x8 character alphanumeric display where it shows the information related to the zone of the PA system that is assigned. 2.1.1 Rest Mode During the rest mode, the display will indicate the music source assigned to the zone, the volume level (0-9) and the lock indicator.
VCC-64. The VCC-64 can select from any of the audio sources available in the system, up to 64. By pressing CH+ or CH- we move from one to the next in a cyclic order.
2.1.3 Automatic Lock The VCC-64 has an automatic lock that will be activated after 25 seconds from the last push of a button. To activate the VCC-64 again, press CH+ and then CH-. The lock indicator will disappear from the display.
DIP-SWITCH Table 4 - Bus Addresses 2.2.3 Cabling The VCC-64 is connected to the system's interface through bus mode, and every VCC-64 will be connected to each other. Only one VCC-64 has to be connected to the system's interface. Rev.0.3...
User Manual: VCC-64 The unit located closest to the system will be connected to the interface, and to the next VCC- 64. The last VCC-64 in the bus will not have any connection to a consecutive device. Figure 2 - Cabling...