Remote Controller - Sony NSP-100 Operating Instructions Manual

IRD REMOTE (remote controller settings)
ON/OFF (third switch from left): Enable (ON) or
disable (OFF) the remote controller.
1/2 (rightmost switch): When using two NSP-100
units, to select the unit that responds to the remote

Remote Controller

Note
Using the remote controller to control the NSP-100
requires settings of both the NSP-100 rear panel DIP
switches and the remote controller.
0 PLAY button
9 PAUSE button
8 Reverse shuttle
playback button
1 DISPLAY button
During movie/still playback: Pressing this button
displays the title of the movie/still being played.
Press once more to clear the display.
During playlist playback: Pressing this button displays
the numerical position of the current event in the
events included in the playlist. (Example: "0003/
0010" means playing event 3 out of 10 events.)
Press once more to clear the display.
2 LIST button
While the standby screen is displayed: Pressing this
button shows the last displayed list screen.
Subsequent presses change the displayed list screen,
in the following sequence.
controller, set different remote controller codes for
them.
For details, see "Preparations" (page 9).
For details, see "Preparations" (page 9).
1 DISPLAY button
2 LIST button
3 MENU button
DISPLAY LIST MENU
PUSH
ENTER
4 ENTER/b, B, v, V control
PAUSE
PLAY STOP
5 STOP button
1 2 3
6 Forward shuttle playback button
4 5 6
7 Numeric buttons
7 8 9 0
"Playlists" screen (list of playlists)
"Video" screen (list of movie files)
"Graphics" screen (list of still image files)
During playlist playback: Pressing this button displays
details of the playlist. Press once more to clear the
display.
3 MENU button
When the menu is not displayed: Pressing this button
switches to menu mode, and the "MENU" screen
appears.
When the menu is displayed: Pressing this button
switches out of menu mode, and the menu display
disappears.
For details of the menu, see "Operation" (page 9).
Names and Functions of Parts
7