GE AEV07KP Use & Care Manual page 8

Structure Mechanism and Installation
Drain water:
To get the maximum cooling efficiency, the air conditioner is designed to splash the condensation water
on the condenser coil.
To the cooling only unit,If the splashing sound annoys you, you can provide an outside drain by using the
following procedure, whichmay however cause a small loss of performance.
1. Slide out the chassis from the cabinet.
2. Remove the rubber plug from the body base plate.
3. Install the drain pan to the corner of the cabinet with 2 screws.
4. Connect the drain hose to the outlet on the drain pan bottom.
5. Slide the chassis into its original place in the cabinet.
Note:
• Drain pan and drain hose must be installed before using reverse cycle models.
• Drain hose or tubing can be purchased locally to satisfy your particular needs.
6