Operation For Mechanical Model; Operation Of Control Panel For Electronic Model - GE AEV07KP Use & Care Manual

OPERATION FOR MECHANICAL MODEL

1. Main Control Knob
Set to Low Cool, High Cool or Turbo Cool as desired (FAN setting operates the fan only.)
CAUTION: If the main control knob is turned off or changed to a fan setting from a cooling operation
setting. WAIT at teast 3 minutes before resetting to cooling operation.
2. Thermostat control Knob
Set the thermostat control knob to your desired setting (Usually 6-7 is recommended), If the room
temperature is not as desired after a reasonable period, turn the thermostat. When the thermostat
control knob is set to 10 moisture may freeze onto evaporator fins and the thermostat control knob
counter clockwise, This will quickly defrost the evaporator fins so that mormal cooling can be resumed.
3. Air Swing Switch
(Airflow direction adjustment Side-to Side)
To obtain a fix airflow direction, set the air swing switch to "ON" for the
vanes to swing from side to side until the desired flow direction is
reached, then switch it to "OFF". For continuous side-to-side air
circulation, set the air swing switch to "ON".

OPERATION OF CONTROL PANEL FOR ELECTRONIC MODEL

Note:
Open the surface panel and operate manually.
1
POWER BUTTON
Under OFF mode, press the ON/OFF
button to turn on the unit. and stops
when pressing this button again.
2
SWING BUTTON
Activate the automatic air swing
function.
3
FAN SPEED BUTTTON
Select the fan speed LOW, HIGH,
TURBO, AUTO in sequence.
Operation Procedure
HIGH
COOL
TURBO
COOL
9