Table of Contents
Advertisement
2-5
Basic Operation
This section explains the basic operation of the XG2000CR.
2-5-1 Turning on the XG2000CR
WARNING
• Insert the power plug completely into the power socket. Using the XG2000CR with
a half inserted power plug may cause a fire or damage.
• If the XG2000CR is to be left unused for any significant period, remove the power
plug from the outlet for safety reasons. Failure to do so may cause a fire or dam-
age.
CAUTION
Do not move, shock, or vibrate the XG2000CR while it is on.
1.
Connect the power cords to the AC outlets.
Following shows the status of front panel LEDs.
Status
Alarm
Power
*:If an error occurs while the XG2000CR is starting up, the Alarm LED (Orange) will start
blinking.
2.
When the system has finished starting up, the Status LED (Green) turns on.
LED
Blink
Temporarily Orange then turns off*
Turns on Green
Indication
Basic Operation
2
63
Advertisement
Table of Contents
