Unpacking The Dishwasher; Installation Requirements; Enclosure Dimensions - EdgeStar BIDW1802SS Installation Manual

Unpacking the Dishwasher

 Use at least two people to move and install the dishwasher to prevent injuries.
 Always lift the dishwasher to move it as sliding it can damage it's base and feet, or floor
surfaces.
 Carefully remove the packaging materials and inspect the dishwasher for damage. If the
dishwasher is damaged immediately contact the dealer that sold you the product. We
recommend that you retain the carton and all packing materials in case you ever need to
move or ship the appliance in the future.
 Remove any shipping labels or tape from your dishwasher before using. Do not use sharp
instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove labels or tape.
These products can damage the surface of your dishwasher.
 Check to make sure all provided installation accessories are included. If any parts are
missing, please contact customer service. Make sure to locate and set aside the dishwasher's
kick plate. The kick plate is attached to the packing material of the dishwasher.
 Put the dishwasher on a level and flat surface that is able to support its entire weight.
 Do not remove the sound-absorbent padding that surrounds the exterior of the of the tub of
the dishwasher.

Installation Requirements

The dishwasher has been designed for built-in installation. Please review these instructions for
enclosure, water, and electrical requirements.

Enclosure Dimensions

The dishwasher is designed to be enclosed on the top and both sides by a standard residential
kitchen cabinet unit.
 The enclosure must be at least 17 3/4 inches wide, 23 inches deep and 32 1/2 inches high.
 For the front door to be flush with the leading edge of the counter top, the counter top must be
at least 23 inches deep.
 The dishwasher should be installed within 10 feet of the sink for the drain to work properly.
1