Advertisement
4. As shown in the figure below, make a loop in the cable assy. Fix the cable to the
mounting base with two cable ties (local supply).
Cable Assy. FI-50-SENSOR-30/50
(30 m or 50 m)
5. Pass the cable assy. through the mast and connect it to the FI-501/FI-502. If the
connector of the cable cannot be passed through the mast (because inside
diameter of mast is too small), use the terminal box (supplied) to make the con-
nection. For how to wire the terminal box, see the FI-501/FI-502's operator's
manual.
Cable Tie (local supply)
Terminal box
3
Advertisement
