Fluid Specifications; Engine - Mercury Mercruiser Tow Sport 5.7 MPI Manual

Section 4 - Specifications
Propshaft power
Displacement
Alternator amperage
RPM
Minimum oil pressure
Thermostat
Timing at idle
Firing order
Minimum battery rating
Spark plug type
Spark plug gap

Fluid Specifications

Engine

IMPORTANT: All capacities are approximate fluid measures.
IMPORTANT: It may be necessary to adjust oil levels depending on installation angle and cooling systems (heat exchanger
and fluid lines).
All Models
Engine Oil (With Filter)
Seawater Cooling System
1. Always use the dipstick to determine the exact quantity of oil or fluid required.
2. Seawater Cooling System capacity information is for winterization use only.
Page 36
Hot
Cold
WOT
Rev limiter
Idle in neutral
At 2000 RPM
At idle
Seawater‑cooled models
Non‑DTS models
Capacity
1.
4.25 liters (4.5 U.S qts)
2.
20 liters (21 U.S. qts)
235 kW (315 hp)
124 kPa (18 psi)
750 CCA, 950 MCA, 180 Ah
AC Platinum (AC 41‑993)
1.5 mm (0.060 in.)
Fluid Type
Quicksilver Synthetic Blend, NMMA FC‑W rated, 4 cycle oil
Propylene Glycol and Purified Water
90-8M0076545
5.7 L (350 cid)
72 A
65 A
4800–5200
5350
600
41 kPa (6 psi)
71° C (160° F)
Not Adjustable
1‑8‑4‑3‑6‑5‑7‑2
(AC 41‑101)
NOVEMBER 2012
eng