Section 4 - Specifications
Engine Specifications
Description
Kilowatt/horsepower
Displacement
Bore
Stroke
Full power engine rated speed
(RPM)
Engine cruise rated speed
(RPM)
RPM at idle
Oil pressure at idle
Oil pressure at WOT
Oil temperature
Thermostat
Electrical system
Alternator rating
Recommended battery
Fluid Specifications
IMPORTANT: All capacities are approximate fluid measures.
6.7L Diesel Engine
IMPORTANT: You may need to adjust the engine fluid levels depending on the installation angle and cooling systems (heat
exchanger and fluid lines).
Always use the dipstick to determine the exact quantity of oil or fluid required.
All models
Engine oil (with filter)
Closed cooling system
Approved Paints
Description
Mercury Cold Fusion White
Mercury Light Gray Primer
Mercury Phantom Black
ZF Marine Transmissions
An identification plate is secured to each ZF marine transmission. The gear ratio, serial number, and model number of the
transmission are printed on the identification plate.
NOTE: The system oil volumes specified are for the complete Mercury Diesel assembly; the transmission, transmission oil
cooler, and transmission oil lines. Always use the dipstick to assure proper oil level when replenishing or filling oil.
Page 40
353 kW (480 mHP)
12‑volt negative (–) ground, 24‑volt negative (–) ground models available
Capacity
19 L (20.1 US qt)
Heavy Duty Diesel Engine Coolant Antifreeze
24.5 L (25.9 US qt)
Specifications
368 kW (500 mHP)
3
6.7 L (409 in.
104 mm (4.094 in.)
132 mm (5.197 in.)
3200
2900
600 ± 25
2.4 ± 0.4 bar (35 ± 6 psi) (engine warm)
4.2 ± 0.5 bar (61 ± 7 psi) (engine warm)
120 °C (248 °F) (maximum)
78 ± 2 °C (172.4 ± 3.6 °F)
1260 W, 14 V, 90 A
1450 CCA, 1850 MCA, or 230 Ah
Fluid Type
15W‑40 4‑cycle Diesel Engine Oil
ASTM D4985 or ASTM D6210
404 kW (550 mHP)
)
Part Number
92‑858042K01
8M0124421
Part Number
8M0094988
92‑80287852
92‑802878Q1
90-8M0117076
FEBRUARY 2018
eng